With many appliances in your home, both preventive and reactive maintenance may be necessary. That is, you take regular steps during common usage of these appliances that will help prevent long-term damage from forming, but in rare cases where such issues come up anyway, you respond to them in kind -- and a great example of this give-and-take is within the area of washers and dryers.
At Dick Kearsley Service Center, we're happy to provide all sorts of appliance repair services to clients throughout Roy and nearby parts of Utah, including comprehensive washer and dryer repairs if any issues come up in these components. However, we're also here to provide clients with tips and expertise on how to avoid these kinds of issues to begin with, especially if they've come up multiple times in the past. Here are some of the preventive areas you should be considering during regular use of your washer and dryer, plus how they help you avoid any long-term issues forming.
Periodically, you should be taking the time to clean your washer even when there's no laundry present. This involves a careful mixture of warm water and vinegar, poured into the detergent dispenser and run through a full cycle on the washer.
Doing this helps remove any built-up residue that could lead to clogs, plus it also kills any mold or mildew that might be present. These can cause a range of issues if left unchecked, so it's important to take this preventative step every few months or so.
Within every modern dryer, a component called the lint trap or filter is present. This is designed to catch any lint that might come off clothes during the drying process, but over time this component can get clogged up.
When this happens, it puts extra strain on the dryer itself while also potentially causing a fire hazard. As such, it's important for both the safety of your dryer and your home that you regularly clean this component out. The frequency with which you need to do so depends on how often you use the dryer, but in general it should be done every few loads at least.
For some dryers, in fact, the lint filter is meant to be changed after each individual load. Check your dryer's owner's manual to see if this is the case with your model, and if so, make sure you're changing it out as directed.
Within both the washer and the dryer, one of the quickest ways to create wear-and-tear and potential long-term damage is by overloading the machines. That is, putting in too many clothes at once for the washer to handle or cramming the dryer full of laundry.
In general, it's best to avoid packing either machine too tightly. This puts extra strain on the motor and other key components, potentially leading to a breakdown down the line. If you have a lot of laundry to do, it's better to run multiple smaller loads than one large one.
Once again, determining your precise limitations here comes down to reading your owner's manuals. These will have specific guidelines as to how much laundry you can put in at once, and it's always best to follow these as closely as possible.
While you're in the process of packing your clothes into the washer or dryer, be sure to check each article of clothing for any items that might have been left in the pockets. This includes things like loose change, receipts, and other small objects. Those that are hard and could create dents or dings in your machines should be of particular attention.
If these items are left in during a wash cycle and then move into the dryer, they can cause all sorts of issues. For one thing, they can damage the clothing itself as well as the interior of the machine. They could also potentially cause a fire hazard, so it's always best to be safe and remove them before starting a load.
For detergents, fabric softeners and other materials you use during a wash cycle, it's important that you're using products that are designed specifically for modern washers and dryers. These will be labeled as such on the packaging, and in general, they'll be much gentler and more effective than their older counterparts.
Older products can cause all sorts of problems, from damaging the machine itself to leaving residue on your clothing. In general, it's best to avoid using anything other than modern, washer-and-dryer-specific products.
If you're ever unsure about a particular product, always err on the side of caution and don't use it. There are plenty of great options out there that are designed for your model.
With your washing machine, the door seal refers to the rubber gasket that goes around the edge of the door. This is designed to create a water-tight connection, and over time it can develop cracks or other issues.
When this happens, it can cause leaks during the wash cycle as well as let outside water and debris in. This, in turn, can lead to all sorts of problems, from decreased washing quality to full-on water damage. As such, it's important to regularly check this seal for any cracks or other issues.
In most cases, you can simply clean the seal with a damp cloth to remove any debris that might have gotten trapped there. If there are any cracks, however, you'll need to replace the seal entirely. This is generally a relatively easy process, but if you're unsure, it's always best to consult your owner's manual or call in a professional.
These are just a few of the preventive maintenance tips you should keep in mind for your washer and dryer. By following these simple guidelines, you can help ensure that your components stay in good working order and don't develop issues.
For more on this, or to learn about any of our appliance repair or HVAC repair services in Roy or nearby areas, speak to our team at Dick Kearsley Service Center today.
If you're the owner or manager of any commercial facility that includes a refrigerator, this will naturally be one of the most important items you're regularly focused on maintaining. Commercial refrigerators are a very different beast from residential ones, typically much larger and running at cooler temperatures, and this means their care and upkeep will be a bit more involved.
At Dick Kearsley Service Center, we're happy to help. We provide a number of appliance repair and related services to clients throughout Roy and other parts of Utah, including commercial refrigeration solutions for all your business's needs. Within this area, what are some of the most common issues we see, and how might they be remedied, either by our team or by other simple fixes you can carry out on your own? Here's a primer.
Because of the simple amounts of power required to generate and maintain the colder temperatures of a commercial fridge, even a slight drop in voltage can cause major issues. If you notice that your fridge isn't as cold as it should be, one possibility is an issue with the power being supplied to it.
Check breakers and fuses first, as these are typically the culprits when power is lost. If those seem to be in working order, you might need to contact a professional electrician to investigate the issue further and make any necessary repairs or adjustments.
While a home fridge is often packed to the gills with all sorts of food items, this isn't generally a good idea with a commercial one. If your fridge is too full, it won't be able to circulate air properly, and this can lead to warmer temperatures as well as potential food spoilage.
The solution here is relatively simple: just make sure not to overload the fridge, and leave some space for air to circulate. You might also want to rearrange items so that the ones that need to be kept cooler are closer to the vents.
This is a common issue in commercial refrigerators, and it can have a few different causes. One possibility is that the freezer temperature is set too low, which can cause frost to form on food items as well as on the evaporator coils.
If you think this might be the case, first check your fridge's manual to see what the recommended freezer temperature should be. If it's set lower than this, adjust accordingly and see if that helps to mitigate the problem.
Another possibility is that the door isn't sealing properly. This can allow warmer air to enter the fridge, causing ice and frost to form. Inspect the door gasket to see if there are any cracks or holes, and replace it if necessary.
If none of these solutions seem to be working, it's possible that there's an issue with the defrost timer or the defrost heater. These are both best left to a professional refrigerator repair technician to deal with.
A key element in any commercial fridge is the fan, which helps to circulate air and keep temperatures consistent throughout the appliance. If the fan isn't working properly, it can lead to a number of issues, including frost buildup and warm spots.
If you think there might be a problem with the fan, first check to make sure that it's free of any debris or blockages. If it seems to be clear, then the issue might be with the fan motor itself, in which case you'll need to call a technician to take a look.
The compressor is another important component, one that helps to circulate coolant and keep the fridge at a consistent temperature. If it's not working properly, you might notice that the fridge isn't as cold as it should be, even if the settings are correct.
In some cases, simply resetting the compressor can fix the problem. To do this, unplug the fridge and then plug it back in after a few minutes. If that doesn't work, then the issue is most likely with the compressor itself and will need to be looked at by a professional.
In many cases, lighting issues are among the simplest to fix. If a light bulb has burned out, simply replacing it should take care of the problem. In other cases, the issue might be with the light switch, and flipping it a few times can often help to get it working again.
If neither of these solutions seems to work, then there might be an issue with the wiring. This is best left to a professional to deal with.
During this blog, we've gone over a number of things you might be able to do on your own to remedy certain commercial fridge concerns. However, if any of the approaches we've outlined make you remotely uncomfortable, or if you're unsure you can carry them out without creating a safety hazard, please don't hesitate to call a professional repair technician.
While some commercial fridge issues can be relatively minor and easy to take care of on your own, others can pose a serious safety risk if not handled properly. So always err on the side of caution, and never try to repair something yourself if you're unsure about how to do it or worried about your safety.
For more on this, or to learn about any of our appliance repair services in Roy and surrounding areas, speak to the staff at Dick Kearsley Service Center today.
There are a few components that play a big role in your HVAC system's efficiency, and one area that likely doesn't get as much attention as it should is that of coils. There are a few coils that play a major part in bringing warm or especially cool air to your home during the various months of the year, and keeping them clean and in good shape goes a long way to maintaining an efficient system.
At Dick Kearsley Service Center, we're happy to assist with a wide variety of heating and air conditioning services, including with all your possible coil cleaning or repair needs. What are some of the coils that are most important to your system's operations, why should they be inspected and cleaned regularly, and how does one go about this process? Here's a basic primer.
First and foremost, for those unaware, here are some of the most important coils that are typically present in today's HVAC systems:
As you may have already gleaned from reading the above, coils play a major role in the efficiency (and proper functioning) of your HVAC system. These coils are responsible for helping to regulate the temperature in your home, and if they are not clean or in good repair, it can lead to a number of issues, including things like reduced airflow, decreased efficiency, and even ice buildup.
In short, it is very important to make sure that your coils are clean and in good condition if you want your HVAC system to function properly. With that being said, let's take a look at some tips for cleaning your coils, as well as how often you should be doing this.
Before we move any further here, a vital note we want to list loudly and clearly: You DO NOT have to clean your own HVAC coils if you aren't comfortable with this process. While the process isn't necessarily hugely complex, it has enough detail and moving parts to it that some people will feel more comfortable leaving this job to our HVAC technicians -- and there's absolutely nothing wrong with that. It's always better to be safe than sorry!
With that being said, if you do want to clean your coils on your own, here's how to go about it:
This is a question for which there's no singular set answer, as it depends on a variety of factors. In general, though, you should be looking to clean your coils at least once per year -- and more often if you live in an area with a lot of pollen or other outdoor allergens.
Now, if you've had coil issues in the past within your HVAC system, you may want to consider cleaning your coils more frequently than once per year. This is especially true if you've had to call for coil repairs in the past, as this could be an indication that your coils are not as clean as they should be.
In other situations, you might notice specific issues that indicate a need for coil cleaning or even other HVAC repairs. For example, if you notice that your energy bills have been spiking recently or that your home isn't maintaining a consistent temperature, these could be signs that it's time to take a closer look at your coils (among other potential issues).
The bottom line is this: Even if you don't think your coils need to be cleaned, it's always better to err on the side of caution and give them a once-over at least once per year. Doing so could save you a lot of money (and headache) down the road.
If you have any questions about HVAC coil cleaning or would like to schedule a time for our team to come out and assist you with any part of this important area, contact our staff at Dick Kearsley Service Center today.
We naturally want our most important home appliances to last for as long as possible, and a good example here is the refrigerator. There are a number of factors that may influence how long your refrigerator will operate for, and knowing them may help you maximize its lifespan in some simple ways.
At Dick Kearsley Service Center, we're happy to provide a wide range of appliance repair services, including refrigerator repairs that will help keep your fridge working optimally well into the future. What are some of the important factors we often discuss with clients during refrigerator repair appointments that will dictate how long the appliance lasts? Here are several to keep in mind.
First and foremost, like many other popular products, not all refrigerators are created equal. There is actually a huge range of potential quality levels out there, both in terms of the materials used during manufacturing and the design elements that are included. In general, you'll want to buy a fridge from a reputable manufacturer that has a history of producing high-quality appliances.
It's also worth noting that even among models from the same manufacturer, there can be big differences in quality. This is often due to slight changes in design or the inclusion of slightly different materials from one year's production run to the next.
As a result, if you're looking for a fridge that will last a long time, it's important to do your research before making a purchase. Learning as much as you can about the refrigerator model you're interested in and reading reviews from other buyers can be helpful.
Another vital consideration if you're choosing a new fridge with the intention of it lasting for many years is to make sure you select the proper size unit for your needs.
If your fridge is too small, it will have to work harder than necessary to keep all of your food chilled properly. This can lead to premature wear and tear on some of the key components, such as the compressor.
On the other hand, if your fridge is too large, it will also end up working harder than necessary. That's because the larger the fridge, the more space there is for warm air to circulate. This can again lead to premature component wear and tear.
It's important to note that you don't necessarily have to choose the biggest fridge on the market in order to have one that's appropriately sized for your needs. In fact, many people find that smaller capacity units are more than adequate for their food storage requirements.
Once you've selected the perfect fridge for your home, it's important to make sure it's properly installed. This may seem like a no-brainer, but if your fridge isn't level or if there are issues with the door seal, these problems can cause unnecessary wear and tear that will shorten its lifespan.
For best results, always have your refrigerator installed by a professional appliance technician. They will know how to properly level the fridge and make sure the doors are sealing correctly.
Next up, one of the areas that you have some of the most control over as the appliance owner is how you actually use the fridge.
For example, overloading the fridge with too much food can put extra strain on the motor, which will cause it to work harder and potentially fail sooner. Similarly, frequently opening and closing the fridge door can also lead to premature wear and tear.
To help your fridge last as long as possible, it's important to be mindful of how you're using it on a daily basis. Avoid overloading it with food and try to limit the number of times you open and close the door each day.
Naturally, how you care for your fridge will also play a role in how long it lasts. To keep your fridge in top condition, it's important to regularly clean both the interior and exterior. This will help remove built-up dirt and grime that can lead to component damage over time.
In addition, you should also be sure to perform routine maintenance tasks like vacuuming the coils and checking the door seals. These simple tasks can help keep your fridge running smoothly for many years to come.
Another area of fridge use that can have a big impact on its lifespan is the temperature settings.
For optimal food storage and appliance longevity, your fridge should be set to between 35 and 38 degrees Fahrenheit. Setting it any colder than this can cause ice buildup on the evaporator coils, which can lead to component damage. Conversely, setting it any warmer than this can cause your food to spoil more quickly.
Some people may look to change these settings for temporary needs, such as during a heatwave. However, it's important to reset the fridge back to the proper temperature ranges as soon as possible to avoid any long-term damage.
Finally, in any situation where your fridge isn't working properly, it's important to have the issue repaired as soon as possible. Whether it's a noisy compressor or a faulty door seal, putting off repairs will only make the problem worse and potentially shorten your fridge's lifespan.
For best results, always consult with a professional appliance technician whenever you're having trouble with your refrigerator. They will be able to quickly diagnose and repair the issue, helping to extend the life of your fridge.
For more on the factors that play a role in your refrigerator's lifespan, or to learn about any of our appliance repair or heating and air conditioning services, speak to the team at Dick Kearsley Service Center today.
While we're still a bit away from the dead of the Utah summer, the fact is that it'll be here sooner than you think -- and this spring period is important for preparing for it. The HVAC realm is of particular importance here, as your system will ensure you and your family are cool and comfortable this summer as long as it's given the proper attention and care.
At Dick Kearsley Service Center, we're proud to offer a number of heating and air conditioning repair and maintenance services for our Layton and nearby clients, including assisting numerous clients with transitioning their HVAC system from one season to another. What are some of the top areas you should be paying attention to this spring as you prep your system for the summer, whether on your own or with the help of our HVAC technicians? Here are several.
If you haven't already done so, now is the time to properly shut down your furnace for the season. The furnace typically is not needed once the temperatures here in Utah are consistently above freezing, so you may be able to shut it down right now -- but be sure to double check the forecasts first. If you want, working with our HVAC technicians can ensure you don't miss any important details during this process.
It's recommended in many cases to have your furnace inspected and tuned up by a professional before putting it away for the summer. This ensures that your system will be ready to go come fall, and can also help identify any potential problems that need to be addressed now while they're still relatively easy and inexpensive to handle.
Filters are a vital part of any HVAC system, so it's important to ensure they're always clean and in good condition. This is doubly true as you prep your system for the summer season; not only will a dirty filter make your system run less efficiently, but it also can cause problems like an iced-over evaporator coil.
Be sure to check your air filters often and change or clean them as needed so that you're ready for the summer season.
Another important part of ensuring your cooling system is ready for summer comes in the form of checking for leaks -- and we mean this in a few different areas:
If you find any leaks around your coils, be sure to have them addressed as soon as possible so that your system is operating at peak condition this summer.
Especially if air quality is important to you, such as if someone in your home suffers from allergies or asthma, it's a good idea to clean your vents and registers now so that they're in top condition once the warmer weather hits. Be sure to use a quality cleaner, such as one specifically designed for this purpose, and check for any blockages like dust or debris.
In some cases, this theme may also extend to your ducts, which we recommend having professionally cleaned at least once every five years.
The thermostat is the device that tells your HVAC system when to turn on and off, so it's important to ensure it's in good working condition. If you don't already have a programmable model, now may be the time to consider an upgrade; these allow you to better control your home's temperature, which can lead to increased comfort and energy savings.
And if you already have a newer thermostat model, now is the time to ensure your settings are where you want them to be. You may want to consider a "smart" model that can learn your preferences and make adjustments accordingly, or you may prefer the more traditional approach of manually setting it yourself.
In any case, giving your thermostat some attention now can help ensure your HVAC system is operating at peak efficiency this summer.
During the summer, your HVAC system relies heavily on the outdoor condenser unit, so it's important to ensure this area is clear and clean. Be sure to remove any debris or obstructions that may be around it, and trim back any foliage or other growth that could impede airflow.
It's also a good idea to give the unit itself a cleaning; you can do this yourself with a hose, or you can hire a professional to do the job for you. In either case, making sure it's clean and performing well will help ensure it can handle the summer heat without any problems.
These are just some of the ways you can prepare your HVAC system for summer so that you're not left out in the heat as soon as the dead of the summer hits. For more on this or how our team can help with any part of it, or to learn about our Layton HVAC and appliance repair services, speak to the team at Dick Kearsley Service Center today.
Many appliances in your home will require some basic attention or upkeep every now and then, and one of the most important classes here is all appliances that are gas-powered. Because gas can lead to safety issues if it's not properly maintained, ensuring your gas-powered appliances are working in the right ways is extremely important for preventing such risks from forming.
At Dick Kearsley Service Center, we're happy to provide a wide range of appliance repair services, including for furnaces and many other appliances that utilize gas for their operations. We strongly recommend avoiding any such repair attempts yourself, as even a small mistake could have serious consequences for both your safety and the quality of the appliance. Let's go over which appliances in your home likely include gas, plus some common signs that they may be experiencing issues and should receive attention from one of our professionals.
For those unaware, here are some of the most common gas appliances found in the average home, plus how they use gas:
There are several other gas appliances in your home, but these are some of the most common.
Now, certain appliances will have indicators of damage or problems that are specific only to them -- and our team of professionals knows all these and can inform you of them as needed. However, there are also a few signs of gas issues that are common across many or even all of these appliances. We'll go over those in our next sections.
Perhaps the single most common indicator of gas appliance trouble is a strong odor. This could be anything from a faint smell to something that's so overpowering it's hard to breathe. If you notice any sort of strange smell coming from any of your gas appliances, it's best not to ignore it and to call in one of our experts as soon as possible.
This smell will usually be of gas itself, but may also have a slightly sulfuric smell to it. It's important to note that not all sulfur smells mean there's a gas leak - but if there is a gas leak, the smell will be much stronger.
Another common smell, for instance, is that of rotting eggs. This is due to a gas called mercaptan, which is added to natural gas so that people can smell it in case of a leak. However, not all leaks will produce this smell, and it's possible for there to be a gas leak without any unusual smells being present.
When utilizing any gas appliance that creates a visible flame, such as a gas stove, oven, furnace, or water heater, it's important to watch the flame and look for any changes in color. If the flame is yellow or orange instead of the usual blue, this is a sign that there is something wrong with the appliance and it should be shut off and serviced.
In addition, if the flame has a "halo" around it, this is also a sign that the appliance is not working correctly.
One of the most common issues with gas appliances is a pilot light that's gone out. The pilot light is a small flame that's lit inside the appliance to start the main fuel burn, and if it goes out, the appliance will not work.
Many times, the pilot light can be relit by following the instructions in the owner's manual. However, if it keeps going out or you're unable to get it to stay lit, this is a sign that there's something wrong with the appliance and it needs to be serviced.
An issue that's common with certain stove burners or ovens is a clog within the gas supply. This can be due to food debris, insects, or other blockages that have caused the flow of gas to be restricted.
If you notice that one of your burners or oven isn't heating up properly, or if it's taking much longer than normal to heat up, this could be a sign that there's a clog in the gas supply. In most cases, it will be necessary to call in a professional to clear the clog and get your appliance working properly again.
For more on how to spot the signs that gas-powered appliances in your home are having issues, or to learn about any of our appliance repair or heating and air repair services throughout Utah, speak to our staff at Dick Kearsley Service Center today.
There are certain systems in your home that are going to have occasional issues based on wear-and-tear no matter what you do, and a good example is your HVAC system. Being prepared for these kinds of events is important, and a common question often arises when any kind of problem is occurring within your setup: Should components be repaired or replaced?
At Dick Kearsley Service Center, heating and air repair and related services are some of our specialties to clients throughout Utah. When any components in your system are having problems, our primary goal is to find the most cost-effective solution for you -- we'll never recommend a more costly replacement if a simple repair will get the job done. What are some of the factors we'll evaluate while making this determination? Here are several that you should be aware of when it comes to how a determination is made between repairing and replacing various HVAC components, especially large ones like your furnace or AC unit.
One of the top factors that will influence our decision to repair or replace is the age of the component in question. In general, components have a lifespan and will need to be replaced at some point -- often sooner rather than later. If your furnace is more than 15 years old, for example, it's likely time for a replacement regardless of any current issues it may be experiencing.
If we were to attempt repairs on components at this age range or further, it's highly likely we'd be right back in your home a few months later to do the same repairs again, and this can quickly become very costly for you. On the flip side, if your component is only a few years old, there are many cases where repairs may be a more viable option.
Another major area we'll be looking at when we evaluate your system's needs is the previous maintenance that's been done on it. If your system has had recent tune-ups, repairs, and/or replacements then it likely won't need extensive work done for a while, opting instead for routine maintenance schedule.
On the other hand, if your system is in disrepair and hasn't had any attention in some time, it's more likely that a full replacement will be the best option. This is because a lot of the smaller issues that can occur with neglected systems tend to go unnoticed and can quickly turn into bigger, more expensive repairs down the road if not addressed.
Even if the system isn't particularly old, has it been experiencing a lot of major issues as of late? If you've been having to call for repairs every month or so, it's likely that the component in question is nearing the end of its lifespan and a replacement would be a wiser investment.
This is especially true if you're having to call us for repairs for the exact same issue each time -- for example, a busted thermostat or a clogged air filter. In these cases, it's very likely that the component is wearing down and will need to be replaced.
In certain cases, your HVAC technician may be inspecting your system to find the culprit of certain issues, and realize that your system has sizing problems. For instance, your furnace may be too small for your current home size, and this can lead to all sorts of problems like inadequate heating, high energy bills, and even premature component failure.
If we find sizing issues with your system, a full replacement is often the best solution in order to get the most out of your investment. This is because installing a properly-sized component will correct the underlying issue and alleviate any of the problems that have been occurring. Continuing to operate the system using an improperly-sized component can often lead to even more expensive problems down the road.
Another situation that might call for replacement of components, even if the system isn't too old or in too much disrepair, is if you're still utilizing an out-of-date system that isn't efficient. If your system is more than 10 years old, it's likely not as energy efficient as current models and may be costing you more in energy bills than you need to be spending.
Replacing an out-of-date system with a newer, more energy efficient model can often lead to significant savings over time, making it a wise investment. In some cases, your home may even be eligible for tax credits or rebates when you make the switch to a more energy efficient system.
Finally, if you're planning to move soon, this may have just a slight impact on your choice between repair and replacement for certain components. Some may feel that because they won't be living in the house much longer and won't benefit from replaced components, it would be better to just do repairs and not replacements.
However, those who are most concerned about getting the best possible price for their home in today's seller's market may opt for replacements in order to get the most value for their home. This is because many times, HVAC system replacements can be a large selling point for a home - it shows that the current owners made a significant investment in their home and were willing to take care of even the smaller details.
In the end, the best decision between repair and replacement will be made by evaluating a number of factors with your HVAC technician. For more on this area or any of our HVAC services or appliance repair solutions, contact the pros at Dick Kearsley Service Center today.
While certain appliances in our home may wear down over time in unavoidable ways, there are also plenty of situations where we have at least some level of control over this progression. One good example here is the oven in your home -- while no oven will last forever even if you take perfect care of it, you can absolutely get a longer lifespan from your oven if you take the right regular care approaches, and one of these involves periodic cleaning.
At Dick Kearsley Service Center, we're proud to offer a wide range of appliance repair services for clients in Ogden and other parts of Northern Utah, with ovens and ranges among the numerous appliances we service for clients regularly. In addition, however, we often provide customers with tips and expertise on how to maintain their highest-value appliances and avoid the need for repairs or replacements as long as possible. What are some general recommendations to keep in mind for cleaning your oven? Here are several.
There's no set frequency with which an oven should be cleaned, and this is because every often is used differently. For example, if you cook frequently, then your oven is going to be used more often and could need a thorough cleaning every one or two months.
On the flip side, if the oven only receives occasional use, you can go several months between cleaning it without risks. However, it should still be cleaned at least twice a year at minimum to ensure that you're getting rid of excess grease and other debris.
First and foremost, you'll need a few basic supplies for cleaning an oven. Most or all of these will typically already be available in your home, and can be purchased at any nearby home improvement store if not. They include:
From here, we'll go over some cleaning methods for each of the major components of a standard oven.
The grates in your oven are some of the most important areas to keep clean, as they're the part of the oven that comes into direct contact with food during cooking. Here are some basic steps for carrying this process out:
While the grates are very important for cleaning, that does not mean you should gloss over the actual interior of your oven. Leaving this space too long in between cleaning will lead to excessive build up of grease and other debris, so aim to clean this area at least once every two months.
Here are some basic steps for cleaning your oven interior:
In some cases, you may have to perform this process more than once for ovens that have not been cleaned in some time. If this happens, it should serve as a good reminder to you to up your oven cleaning frequency.
This process is likely the easiest of the bunch:
For many modern ovens, a self-cleaning function is built right in. This feature typically involves a high level of heat that's run into the oven, helping burn away any residue left inside.
It's important to remember that as nice as the self-cleaning function can be, there are a number of downsides, including:
For these reasons, while using the self-cleaner periodically is just fine, we recommend using the above steps for more common cleaning needs.
To learn more about how to clean your oven to help it last as long as possible, or for information on any of our appliance repair or other services in Ogden, speak to the team at Dick Kearsley Service Center today.
520 S State, Clearfield, UT 84015
Hours Of Operation:
Mon-Fri: 8:00 am - 5:00 pm
Saturday: 8:00 am - 4:00 pm
Sunday: Closed
Davis/Morgan: 801-773-4836
Weber County: 801-393-1265
Brigham City: 435-553-4556
Salt Lake: 801-292-1636
© Dick Kearsley Service Center 2023
