While certain issues with our home appliances are the sort that can typically wait a few days for service if needed, there are others that are especially severe (or dangerous) and require immediate attention. The refrigerator is a good example here - while most fridge repairs can hold for a little while without causing major problems, there are a few examples of those where you should be calling repair professionals right away.
At Dick Kearsley Service Center, refrigerator repair is just one of several quality appliance repair services we offer to clients around Ogden, Roy, Kaysville, Syracuse and nearby areas. Here are some examples of refrigerator issues that are either dangerous or so severe that they require immediate attention from professionals like ours.
In any case where your refrigerator appears to have suddenly lost all power, you should definitely call in the professionals right away. While it is possible that a simple circuit breaker issue may be causing this problem, there could also be something far more severe going on such as faulty wiring or even a short-circuit.
Now, it's important to perform a few basic checks before you get to this point. First, be sure the fridge is actually plugged in - it's possible the power cord may have become disconnected or may have stopped working. Also, check to make sure your circuit breaker hasn't been tripped - if it has, simply reset it and see if that fixes the problem.
If neither of these resolve the issue, then you'll need to call in a refrigerator repair professional like our team here at Dick Kearsley Service Center.
If your refrigerator is making any sort of unusual noise (i.e. a loud humming, banging, or clicking sound) then it's likely an issue that should be addressed right away. While some noises may simply be the result of something minor like an unbalanced door, others could be indicative of a more severe problem such as a broken compressor or fan.
Either way, it's important to have this issue looked at by an experienced refrigerator repair technician like ours so that the issue can be identified and fixed quickly - before any further damage occurs.
Have you begun to notice that your fridge's water dispenser feature is no longer working? If so, the issue could be caused by a frozen water line. This is a relatively common problem that often occurs as a result of condensation buildup in the tube, or from the temperature inside the fridge being set too low.
Either way, this should be addressed right away as it can cause major damage to your refrigerator if left unchecked. Our technicians can help diagnose the problem and repair it quickly to ensure that your fridge is back in working order.
Another key component for keeping your refrigerator running at optimal levels is the defrost drain. This drain is responsible for ensuring that any built-up water in the fridge's freezer evaporates effectively.
If your defrost drain has become clogged with debris, then it could cause a significant amount of water to build up inside your refrigerator - leading to major issues like frozen food and even mold buildup. If you're noticing any of these symptoms, then chances are that your fridge's defrost drain has become clogged and needs to be cleaned out right away. Our team of experienced technicians can help you identify the issue and repair it quickly so that you can get back to enjoying a properly functioning refrigerator.
If your refrigerator's fan motor has suddenly stopped working, then it could be indicative of a much larger problem. The fan motor is responsible for circulating air throughout the fridge and keeping the temperature even.
If this component has failed, it may lead to areas of your fridge becoming too cold while other sections become overly warm - leading to food spoilage and other potential issues. In this case, it's important to call in an experienced repair technician like ours as soon as possible to get the issue addressed and resolved quickly.
By taking these necessary precautions and acting swiftly, you can ensure that your refrigerator is kept in top working order - while also avoiding any major or potentially dangerous issues from occurring. If you're experiencing any of the issues mentioned above, then don't hesitate to contact our team here at Dick Kearsley Service Center for fast and reliable refrigerator repair services today - or for any of our other appliance repair solutions in Roy, Ogden, Kaysville, Syracuse or surrounding areas.
There are certain appliances where those who own them can often provide some level of upkeep or even repair - but only to a point before professionals are typically needed. One great example here is your oven, which may sometimes experience very minor issues that you can remedy on your own - but may also sometimes be dealing with problems that only qualified pros should be dealing with.
At Dick Kearsley Service Center, we're here to help with oven repair and any other kind of appliance repair our clients around Ogden, Roy, Kaysville and Syracuse might require. Here's a primer on the sorts of oven issues that are easily enough remedied on your own in most cases, but then some examples of larger issues that should usually be left to our professionals.
There are several examples of relatively small oven upkeep or even repair concerns that most owners will be able to manage themselves, including:
However, there are several issues that will require the help of a professional in oven repair. Our next several sections will go over these.
Perhaps the single most serious issue with any oven is a potential gas leak. This is something that should never be taken lightly, as it can represent both a serious safety hazard and even a fire risk in the worst cases. If you suspect there's a gas leak of any kind, contact our professionals immediately for help.
Typically, the first sign of a gas leak is a burning smell. This should be taken seriously and handled quickly. You may also smell actual gas itself, or you may even find signs of soot around the oven.
Another issue that can require professional help is a broken heating element. This should be relatively easy to diagnose, as it typically presents itself with issues like uneven heat distribution, certain portions of the oven not heating at all, or even smoke being present. For instance, if you constantly are finding that food is burned despite the oven temperature being set correctly, this can be an indication.
Changing a heating element in an oven is a task that requires a certain level of expertise and experience. That's why it's always best to leave this work to our pros who have the right qualifications.
If you hear sounds like grinding, rattling, buzzing or clicking emanating from your oven, this could potentially be a sign of an issue with the fan itself. If you find that this is occurring, it's best to turn off the oven and contact our team for assistance.
Depending on what's causing the issue, we may need to replace the fan or internal parts; again, leaving this work to professionals is the best course of action here.
In other cases, if you've already confirmed that there are no issues with your power or gas connections and cannot get the oven to turn on at all, this could be a sign of an internal problem. In this case, it's again best to contact our professionals so we can take a look and determine what repairs may be necessary.
Thanks to all the experience our technicians have gained over the years, you can rest assured that your repairing needs will be handled quickly and correctly.
While a few minor oven repair issues can often be resolved by the owner themselves, in most cases it's best to contact our professionals for help with larger problems. At Dick Kearsley Service Center, we have the right qualifications and experience to handle even the more complicated repairs that are needed. From gas leaks to fan noises to broken heating elements, our team is ready and willing to help.
If you're ever in need of oven repair or any other kind of appliance repair in Ogden, Kaysville, Roy or Syracuse, don't hesitate to give us a call - we'll be more than happy to work with you!
Many of the main appliances in our homes will give off some noticeable signs if they need to be repaired or possibly replaced, and one of the best examples is the washing machine. As an appliance that has several different moving parts and components, there are a few possible indicators that issues might be afoot and require some attention from professionals.
At Dick Kearsley Service Center, washing machines are just one of numerous appliances we're happy to provide repair services for to clients around Ogden, Roy, Kaysville, Syracuse and nearby areas. Here are some of the possible signs that your machine might give you that it's time to look into repairs or possibly even a replacement.
As with any appliance that uses water and has numerous pipes and hoses attached, leaks are a common sign that something might be going awry with your machine. This could be due to any number of issues from the least serious such as worn door seals or gaskets all the way up to more serious problems like a failed water pump.
In some cases, you can track down the source of the leak and attempt a DIY repair if it's something basic such as a hose coming off. However, more serious leaks will require professional attention since they are likely to be linked to malfunctioning parts within your washer.
Another common sign that some repairs might be needed for your washer is if it's making strange noises or is vibrating too much. This could be related to any number of issues, from a drum being slight out of balance to debris or something else interfering with the motor.
For instance, if you hear a loud sound during the spin cycle for your machine, an issue with the motor that runs the drum or a belt that is connected to the motor could be at fault. In some cases, you can visually inspect the parts around your washer and attempt simple repairs yourself, but more serious issues will require professional repair services from experts like those here at Dick Kearsley Service Center.
One particular sound that can indicate a problem with your washer is squeaking. If you hear this sound that does not go away, it could mean the bearings on your machine's inner drum are starting to wear out. This is an issue that should be addressed as soon as possible, since if the bearings fail completely, it could lead to more serious damage and an even greater bill.
In other cases, squeaking sounds could mean that something is stuck underneath the agitator of your washer, and that's a problem you may be able to fix yourself by simply removing the agitator and checking for any items that may be causing the noise.
Especially if you have a modern washing machine, chances are if it's having an issue, it will generate a special error code that you can use to help diagnose the problem. For instance, many of the newer models will display an "F20" code if there is an issue with its water intake, which could be caused by a clogged filter, worn hose or blocked siphon.
Depending on the exact error code you receive, you may be able to diagnose and fix it yourself simply by researching what it means and following the appropriate steps. But if you're still not sure or unable to properly repair the issue yourself, don't hesitate to call in the experts here at Dick Kearsley Service Center for help.
While this is not a "sign" per se, a good rule of thumb to follow when it comes to any appliance is that after a certain amount of time and use, you may want to consider looking into replacing it entirely. With washing machines in particular, they generally last anywhere from 8-12 years, depending on how often you use the appliance and the quality of its parts.
If your machine is nearing the end of its lifespan and you're having to constantly repair it to keep it running, then this could be a sign that it's time to look into purchasing a new one. However, if your current washer is still relatively young but just needs some minor repairs, our experts here at Dick Kearsley Service Center would be more than happy to help get it back in working condition as soon as possible.
In the end, no matter what kind of issues you may be facing with your washing machine, there is always a solution available. With our team at Dick Kearsley Service Center on your side, we will make sure that you are back up and running in no time. Contact us for help with washing machine repairs or any other kind of appliance repair need in Ogden, Roy, Syracuse, Kaysville or any nearby area.
The early spring period we're just readying to enter around Utah is an important one for a number of home fixtures or components, and one great example is your air conditioner. While this unit has typically been sitting mostly or fully unused during the winter period we're finally coming out of, this chunk of time is typically when you'll have a need for it again - and when you might want to think about a few basic maintenance elements.
At Dick Kearsley Service Center, we're happy to provide a number of AC repair and maintenance solutions to clients around Ogden, Layton, Roy, Kaysville and other parts of Utah. We're here to help with any early spring tune-ups or inspections you might need. What are some of the key elements that should be covered for early spring AC maintenance, whether on your own or with help from our team? Let's take a look.
If you utilize a cover for your outdoor AC unit during the winter, such as a condenser cover that specifically fits the unit, you'll want to remove that prior to using the AC again. In most cases, these will have been put in place as a protection against snow and ice buildup, which can lead to damage over time if it's not removed.
As you're doing this, be sure to check for any signs of damage to the condenser, keep an eye out for any loose screws and make sure all electrical connections are in good condition. Also just make sure the cover is cleaned or wiped off so it's ready for next year.
In some cases, such as if you don't utilize a cover, this might have been done throughout the winter. But in any case, it's important to make sure that your outdoor unit is cleared of dirt and debris. Do a visual inspection and make sure all grills are free from leaves, twigs or other items that could block airflow or present a fire hazard.
If you find a lot of buildup, you may want to use a mild detergent and water mixture to spray off the unit. Be careful not to damage any of the fins or components as you do this.
The hoses that connect your AC system's condenser with its evaporator coil should be checked for any signs of wear and tear or leaks. If you have any cracked hoses, they should be replaced prior to use in order to avoid any potential refrigerant losses.
Your AC system's filters are another important early spring maintenance item that shouldn't be overlooked. Dirty filters can lead to reduced efficiency and higher energy bills, so it's important to make sure they're cleaned or replaced as necessary.
How often you should be doing this depends on a few factors, such as the type of filter you're using and the amount of use your AC gets. Generally speaking, however, it's a good idea to replace or clean filters at least once per season.
Another important element is to make sure that your vents and registers are cleaned of any dust or debris as well. This will help ensure airflow isn't restricted in any way, leading to better efficiency from the system. Cleaning these with a vacuum cleaner or brush can usually do the trick.
If significant buildup is found, you may also want to use a mild detergent/water solution or just a damp cloth to wipe away dirt and debris.
The thermostat plays a vital role in the operation of your AC system, so it's important to make sure it's working correctly. You should inspect its settings and check any batteries if necessary. It can also be a good idea to run a quick test by setting the temperature lower than the current room temperature and making sure the unit turns on as expected.
Before the warmest months are upon us, it's a good idea to turn on your air conditioner and make sure it runs as expected. This should include checking for any strange noises or odors that could indicate an issue as well. If any problems are noted, be sure to contact a professional technician for assistance.
As you can see, there are a few fairly straightforward items that homeowners can handle on their own when it comes to preparing an air conditioner for the upcoming season. However, it's also important to remember that professional maintenance is still necessary for optimal performance and efficiency - and to help with any of the above areas you might not be comfortable with.
Having a system inspected and serviced by a qualified technician prior to use each year is always a wise decision. This will include more in-depth elements such as checking the refrigerant levels, measuring voltage and amperage, inspecting belts and motors, and more.
And at Dick Kearsley Service Center, we're here to help you with any and all of your air conditioner maintenance needs in Ogden, Roy, Layton, Kaysville or nearby areas. Get in touch today to learn more and schedule an appointment!
The concept of preventive maintenance is one that's valuable across numerous industries, and particularly larger commercial businesses who have expensive systems in their facilities. One great example here is the realm of commercial refrigeration, where some very simple, period preventive maintenance steps can help you avoid much more significant and costly problems.
At Dick Kearsley Service Center, we're here to help with all of your commercial refrigeration repair and maintenance needs in Syracuse and surrounding areas, ensuring that your refrigeration needs are never at-risk. Whether on your own or with the help of our team members, here are some of the top areas of preventive maintenance that should be considered for any commercial fridge setup.
Like many other components, a clean refrigerator is an efficient one. That's why it's so important to keep the interior of your commercial refrigeration unit as clean and free of debris as possible. This includes wiping down shelves, scrubbing any build-up in crevices, and clearing out any expired food items or other matter that can accumulate inside.
By doing this, you can minimize the risk of debris or accidental blockage causing problems with airflow or other issues, leading to a higher energy bill and greater wear and tear on your unit over time.
The seals around the door are one of the most important components of any refrigeration system. Not only do they ensure that air won't escape and that the temperature of your fridge remains as consistent as possible, but they also prevent dust and other particles from entering.
That's why checking the seals regularly is so important; if you see any signs of wear or cracking, you should act quickly to have them replaced before any further damage occurs.
Every so often, you should be checking to ensure that your temperature and defrost settings are accurate. As temperatures change, so too should the settings on your fridge; if these aren't updated regularly, it can lead to problems with food spoilage or the buildup of condensation in certain areas, which can be difficult (and costly) to fix.
If you find that your temperature has fallen to lower settings than required, you may need to adjust the thermostat. In some cases, this might require help from a professional service technician.
Airflow is vital for any commercial refrigeration system, as it's what helps to keep temperatures consistent throughout. That's why checking the vents and filters regularly is so important; if they're clogged, blocked, or otherwise obstructed, it can lead to problems with temperature control.
To ensure that your airflow remains optimal, you should take care to clean the vents and replace the filters when needed. Doing this can help to extend the lifespan of your refrigeration unit, while also keeping it running strongly and efficiently.
Another key area of preventive maintenance to keep in mind is the lighting inside your commercial refrigerator. Lights are an essential component for any refrigeration system, but they can also be easily overlooked when it comes to regular servicing.
That's why it's a good idea to check the lights inside your fridge on a regular basis; this includes checking for burned-out bulbs, ensuring that the wiring is secure and intact, and replacing any worn or damaged parts as needed.
The fan motor is a vital component within your commercial refrigeration system, and its blades are what help to distribute the cool air throughout your unit. That's why it's so important to inspect them regularly and make sure they're spinning freely; if you notice any signs of wear or damage, you should act quickly to get it repaired before further harm occurs.
In particular, it's essential to check the fan blades for any nicks or cracks, as these can cause significant problems down the line. Doing this regularly can help you keep your system running smoothly and efficiently, avoiding costly repair bills in the future.
Finally, the condenser coils in your commercial refrigeration system should be checked regularly to ensure they're clean and functioning correctly. You can do this easily by using a brush or vacuum cleaner to remove any dirt or dust that might have accumulated over time; not only will this help keep the energy costs of your unit lower, but it will also improve its overall performance.
Preventive maintenance is an essential practice for any commercial refrigeration system; by taking the time to inspect and maintain your unit on a regular basis, you can help ensure that it runs smoothly and efficiently, while avoiding costly repairs in the future. Taking these simple steps can help you keep your refrigeration system running as well as possible.
For more here, or to learn about any of our appliance repair solutions for clients in Syracuse and other parts of Utah, speak to our team at Dick Kearsley Service Center today!
The concept of keeping items cool is one that's used across several different industries and formats, and multiple different unit types might be utilized depending on the need here. From varying sizes to different specific models that serve direct purposes, there are numerous options for commercial refrigeration and freezer needs.
At Dick Kearsley Service Center, we provide a huge range of commercial refrigeration services, including repairs, installations and everything in between. While a full list of every different type of commercial refrigeration unit would take days to lay out here, let's go over a few of the most common broad categories for commercial refrigeration, all of which we're happy to provide service on for any major brand.
One of the most common refrigeration setups found in industries like restaurants and supermarkets is the combination of a commercial refrigerator and an adjacent preparation table. The refrigerator typically has two doors, or one door with multiple compartments that can be separated depending on the food items to be stored in each.
This setup allows for easy access to both the items being refrigerated as well as space to prep the food before it's added into any dish. It also keeps food at a controlled temperature and prevents cross-contamination, which is essential to serving safe and delicious food.
Reach-in freezers are a great option for establishments that need to store large amounts of frozen items in a confined space. These units typically have two doors, one of which can be opened independently of the other, and they range greatly in size depending on the cold storage needs. Reach-in freezers are particularly useful for restaurants that offer frozen food items like fries or fish sticks, as well as for supermarkets with more expansive options for frozen foods.
Another common cold storage setup can be found in bars, where they typically use smaller refrigeration units that are great for storing bottles and cans. These units are made specifically with the bar setting in mind, as they come with plenty of shelves that can store several cases of beverages at once.
In addition to taking up less space than a standard commercial refrigerator/freezer setup, bar refrigeration units are also designed to stay open even when items are being taken in or out of the unit. This allows for easy access during busy periods and prevents customers from having to wait for drinks as people search through a larger refrigerator/freezer.
A similar type that some would include in this category is the wine bottle cooler, which is designed to keep wine at an optimal temperature and can be used either in the bar or restaurant setting.
In many settings, whether we're talking about a kitchen, a bar, or even a retail store, there can be a need for cold storage but limited space. This is where below-counter refrigeration units come in handy. These are small refrigerators that are built into the countertop and can be used to store items like drinks, snacks, and ingredients without taking up much room.
For instance, a restaurant might use one of these units to store ingredients for dishes, or a retail shop could keep drinks on hand for customers.
Further still, many entities - even those that aren't directly part of the food or beverage service industry - might find a need for cold storage. Cold merchandizing units are designed to keep items at an optimal temperature while on display, and they can be found in places like convenience stores or other retail shops.
These refrigeration units come in various styles and sizes, allowing customers to conveniently see what products are on offer and choose from them. For example, let's say you're in a store and you want to buy a cold drink. With these merchandizing units, you can walk up to the unit, select your item, purchase it, and enjoy it without having to wait any longer.
Commercial refrigeration is an essential element in many industries that require temperature control for food or beverage items. Whether it's a restaurant, supermarket, convenience store, or more specialized setting like a bar or retail shop, there are plenty of ways to use refrigeration and freezer units in order to keep items at the desired temperature. By understanding the different types of commercial coolers that can be used for this purpose, businesses can ensure that their customers have easy access to safe and delicious food.
For more here, or to learn about any of our appliance repair or related services, speak to our team at Dick Kearsley Service Center today.
Some of the most commonly-used appliances in a given home will often be gas-powered, and some of the chief examples here are appliances used for heating and cooking food. Many homes will have their entire stove and oven setup (or their range) powered by gas, and if this is the case in your home, knowing some of the simple maintenance approaches for these items will often pay off.
At Dick Kearsley Service Center, we're happy to offer numerous forms of appliance repair and maintenance services to clients around Utah, including gas appliance maintenance for any gas-powered items in your home. And while certain areas of significant repair or maintenance will require assistance from our professionals, there are many other forms of basic gas stove, oven and range maintenance you can often carry out on your own. Here's a primer on some of the most important areas to cover here to ensure that your gas appliances work efficiently and last a long time.
Because terminology definitions may vary somewhat between people, and because we don't want our readers to be confused, let's quickly distinguish between stoves, ovens and ranges. A stove is a single appliance that contains both burners and an oven in one unit; these can often be powered by gas or electricity. An oven is a separate unit from the stove, and it's typically used for baking and roasting (it's also usually powered by either gas or electricity).
A range, on the other hand, is a single appliance that combines both the stove and oven in one unit, but it's usually only powered by gas. This is a very common configuration in many homes, though there are still other possibilities out there as well.
As most homeowners who have installed a gas-powered appliance know, regular maintenance on these items can be a bit more involved than with their electric counterparts. That said, no matter what type of gas appliance you may have in your home, regular maintenance is a must in order to ensure that it runs safely and efficiently for many years to come.
Our next several sections will go over some key gas range and oven maintenance approaches to always have an eye on.
One of the most important areas to tackle in terms of gas oven and range maintenance is the burners themselves, including both on the stovetop portion as well as in the bottom of the oven.
Regularly cleaning these portions of your appliance helps ensure that it's working without burning excess fuel or putting out inefficiently low heat levels.
You'll want to visually inspect each burner for any buildup or clogs, and you may need to remove them to get a better look. If there are clogs here, use something like a pipe cleaner to gently scrub away any debris without damaging the burner itself. Additionally, if there's excess corrosion on the burners, you can try using some fine steel wool and rubbing alcohol to gently scrub it away.
Another key aspect of gas oven and range maintenance is regularly inspecting the oven door seal. This is the rubber or silicone gasket that runs around the perimeter of your oven door, and its main job is to keep heat inside while baking - but if it's not in good condition, it won't be able to do its job properly.
Check the seal to make sure that it's not cracked or deteriorating, and if you see any issues here, replace the seal right away.
As you know, when you cook on the burners of your stovetop, food can often get stuck onto the grates. This residue buildup can lead to inefficient heating and poor burner performance, so it's important to regularly clean these components as well.
To do this, try using a combination of hot water and dish soap with a sturdy brush or scrubber. If the grates are especially dirty, you can also try boiling them in water for a few minutes and then scrubbing off any extra debris with a brush or sponge.
You should be cleaning your gas oven and range regularly to maintain efficiency, but it's important to avoid using harsh chemicals or abrasive scrubbers for this task. Doing so can damage the finish of the appliance as well as potentially corroding its internal components over time - so stick with hot water and dish soap whenever possible.
Finally, you'll want to occasionally check your gas oven's connections to make sure that they're secure and not leaking any gas. This is a job best done by a trained professional, as it involves working with potentially hazardous materials.
That said, if you ever notice any strange smells or hear hissing around your gas appliance, turn off the gas and call a technician right away.
Gas ovens and ranges can be powerful tools when it comes to heating and cooking food, but they require more care and maintenance than their electric counterparts. By following the tips outlined in this article, you'll be able to keep your gas range running efficiently for years to come - so don't neglect it!
For more here, or to learn about any of our appliance repair services for Utah clients, speak to our team at Dick Kearsley Service Center today.
Have you recently begun to notice strange, foul odors coming from your dishwasher, whether before, during or after use? Not only can this be an annoying issue for many homeowners, there may be some cases where it's also a sign of a more significant issue taking place within your dishwasher that may require repair.
At Dick Kearsley Service Center, we're happy to assist with a wide variety of appliance repair services for Kaysville and nearby Utah clients, including dishwasher repairs for any issue you may be dealing with. What are some possible causes of odors coming from the dishwasher, and what can be done about them - either on your own or with the help of our repair specialists if needed? Here's a rundown.
The most frequent cause of smelly odors emanating from your dishwasher is a clogged drain filter. This filter is responsible for trapping any pieces of food or debris that may have been missed by the dishwasher's wash cycle. If these pieces become stuck in the filter and are not removed, they can begin to rot and emit foul odors.
Fortunately, cleaning and replacing this filter is a relatively simple task you can do on your own if needed. Here are the basic steps:
Of course, if you're still experiencing foul odors or other issues with your dishwasher - or just don't feel comfortable taking on this task yourself - then please don't hesitate to contact our team of appliance repair specialists, who will be happy to handle this on your behalf.
In other cases, it won't be the drain filter that's clogged, but actually the dishwasher's drain itself. This will require some more extensive work to clear out, so we would recommend calling in a professional like our team at Dick Kearsley Service Center if necessary.
That's because dishwasher drain lines operate differently from other plumbing fixtures, and may require special tools or techniques to properly unclog. We'll be able to quickly and safely identify the source of your dishwasher's clog and get it cleared out so that you can go back to enjoying clean dishes free from any strange odors.
Most dishwashers contain a heating element that speeds up the water heating process and also plays a role in drying the dishes and preventing bacteria growth on the plates. If this element is malfunctioning, it can cause strange odors and other issues with your appliance's functioning that will likely require professional repair.
This particular issue will often come with a telltale sign: A burning plastic odor that you may notice coming from the dishwasher's interior. If you're familiar with this particular smell, then you'll know that it likely indicates an issue with the heating element and means you'll need to call in an appliance repair specialist.
However, it should be noted that there are some cases where this is only a temporary issue. For instance, if a loose food lid container or piece of silverware falls through its rack and happens to contact the heating element during the dishwasher's operations, then that could result in a localized burning smell.
If you notice this kind of odd odor, then it
wouldn't hurt to check for any foreign objects inside your dishwasher before calling us in for repair service. If there's nothing there, then you can go ahead and get in touch with our team so we can take a closer look and provide any repairs necessary.
In other cases, spending some time cleaning out your dishwasher from food particles and debris can help keep odors away. It's a good idea to do this on a regular basis, as buildup of particles in tight spaces can start to produce bad smells over time.
To clean out your dishwasher, first remove all the racks and any other removable parts. Then, you can use a damp cloth to wipe down the interior walls and any other surfaces, as well as around the filter and other areas where food particles may have built up over time.
Finally, you can put all the parts back together again and turn on your dishwasher for a quick cycle to help ensure everything is properly cleaned out. Doing this on a regular basis can help keep foul odors away, and also make sure your dishwasher is running at its best.
Finally, if none of these solutions have seemed to help with your issue of strange odors coming from your dishwasher, then it's possible that there may be some mold or mildew buildup on the rubber gaskets. This is a common problem for many homeowners, and can be especially true if you live in an area with high levels of humidity.
If you suspect this is the case, then it's important to take steps to clean the gaskets. You can do this by using a mixture of warm water and bleach, as well as a scrub brush or toothbrush if necessary. This will help rid your dishwasher of any moldy buildup, allowing you to go back to enjoying it free from any strange odors.
If none of these solutions have seemed to work, then it could be time to call in a professional like our team at Dick Kearsley Service Center for further assistance. With years of experience providing appliance repair service, we can quickly identify the source of your issue and provide any necessary repairs so you can get back to enjoying clean dishes free from any strange odors.
For more information or to get started with a Kaysville repair evaluation, don't hesitate to contact us today!
There are a number of home appliances that are pretty unlikely to have significant issues unless you fail to perform certain basic areas of upkeep, and the refrigerator is a great example. Fridges are meant to work without issue for years at a time, so long as you manage just a few very minor upkeep areas -- one of which is changing your fridge's water filter periodically.
At Dick Kearsley Service Center, we're here to offer a wide range of appliance repair services, including for any refrigerator issue you may be dealing with. We also regularly provide clients with tips on how to avoid repairs for appliances like these on a regular basis, and changing your water filter when necessary is one key such area for the fridge in particular. Why is this important, and when are some times when you should be looking at changing filters? Here's a simple rundown.
Changing filters at the right intervals is important for your fridge, and for multiple reasons. This area plays a role in both the health of your home's occupants and the lifespan of your fridge.
For starters, your fridge's water filter helps to ensure that the water that comes out of its dispenser and is used for ice making is safe for you and your family. The majority of these filters are designed to remove chlorine, lead, mercury, magnesium, and calcium from the water that passes through them.
In addition to changing these filters at regular intervals so that the water you consume out of your fridge is clean, it's also important to do so because otherwise a build-up of minerals and contaminants can occur. This could potentially cause leaks or other issues in your refrigerator. If these are left for too long without being addressed, you may even end up needing to replace the fridge entirely at a major expense.
Our next several sections will go over some situations where you should strongly consider replacing your fridge's water filter.
If filters have become so clogged up with impurities and debris that they are restricting your waterflow, it's time to change the filter. This can cause reduced flow both out of the dispenser and through ice makers.
Now, there are other possible reasons why your fridge may be experiencing limited water flow, some of which don't relate to the filter. However, if you notice this issue alongside some of the others we're about to go over, it's a good idea to take care of replacing the filter as soon as possible.
Filters are built to remove impurities from your water, and because of this many will also absorb any other smells or flavors that come through them. If you're noticing odd odors or flavors coming out of your fridge's water or ice, changing the filter should resolve this issue.
One of the most common such odors is that of rotten eggs, which is due to a chemical reaction in the refrigerator's water dispenser. This smell will become very prominent if left untreated, but can be taken care of by replacing your filter -- though you may also want to look into replacement parts for the fridge.
Again, there are other possible reasons for this flavor or odor being present besides the filters themselves becoming clogged. However, if you're noticing these issues along with the others we've covered, it's a good idea to replace the filter as soon as possible.
Another possible indicator that it's time to change the water filter in your fridge is if you're hearing strange or unusual sounds coming from the appliance. A clogged up or otherwise bad filter can make quite a bit of noise -- like loud gurgling, hissing, and clanking.
If you begin to notice any such sounds in your fridge, it may be a good idea to take a look at the filter and determine whether or not it's time to replace it. Again, there could be other issues at play here causing the problem, but this is one area you'll definitely want to check out if you begin hearing strange noises coming from the appliance.
In other cases, a bad water filter may cause the ice maker in your fridge to stop functioning entirely. If you notice that the button used to dispense ice isn't working, or if it works intermittently at best, then replacing your filter is likely the key to getting things up and running again.
This can be a frustrating problem for many people and can lead to the growth of mild to severe annoyance with your fridge. However, if you're noticing this kind of behavior in conjunction with any of the other issues we've outlined here, it's almost certainly time to take care of replacing the water filter in your appliance.
Finally, you don't necessarily need a specific issue to be taking place with your fridge in order to know that it's time to replace the filter. If you're unsure of when you last changed your filter, but figure it's been more than a year, then the chances are good that this may be causing issues with your water.
For more on how often you should be changing refrigerator water filters to preserve both your health and your fridge's lifespan, or to learn about any of our other appliance repair or HVAC repair services, speak to our pros at Dick Kearsley Service Center today.
As the Utah weather turns from the dry heat of summer to the eventual bitter cold of winter, residents around the state are looking to ensure that their furnace and other important HVAC components are prepared for the changing seasons. Fall is an important time for this sort of transition, just like spring is for the flip side of the coin.
At Dick Kearsley Service Center, we're here to help. We provide a comprehensive range of heating and air conditioning services to clients around the state, including furnace services to help make sure your space is prepared for the upcoming cold season. What are some simple themes that residents should be looking at with regard to their HVAC system this fall, whether on their own or with our help? Here are several to consider.
While part of the fall approach for your HVAC system involves looking forward to the upcoming winter, another chunk also includes looking back at how the summer went. This is especially true for your outdoor AC unit, which took the brunt of the warm weather work this past season. As such, it's important to give it a good once-over as we head into fall. This includes:
These are all things that our experts can take care of for you as well, so don't hesitate to give us a call if you need assistance. This is a very important area that should not be glossed over -- just because your AC is not being actively used right now does not mean it can be neglected, and leaving problems unaddressed will only serve to worsen them the next time you need to use the AC.
This is a good HVAC tip for any season, but it's especially important as we transition from one to the next. Your furnace will be working overtime in the coming months, so you want to make sure that its air intake is as clean and unobstructed as possible. This means regularly changing your HVAC filters, which you should be doing every 1-3 months anyway. This is a simple process that anyone can do on their own, and it will make a big difference in how efficiently your furnace runs this winter.
Fall is also a season where you'll be changing some important settings on your thermostat, and this is also a good excuse to inspect and clean it as needed. As the weather gets cooler, you'll want to start gradually transitioning your thermostat settings down from the summertime highs. This will help get your furnace ready for more regular use, and also give you a chance to make sure that the thermostat itself is still in good working order.
If it's not, now is a good time to invest in a new one. Smart thermostats are all the rage these days, and they can save you a lot of money on your energy bills over time. They're also relatively easy to install, so if you've been thinking about making the switch now is a great time to do it.
Over the long summer we've just been through, it's possible that dirt, dust, lint and other debris have found their way into your vents and registers. This is a problem because it can impede airflow and make your furnace work harder than it needs to, which wastes energy and drives up your heating bills. As such, it's a good idea to clean out your vents and registers as we head into fall.
This is something our experts can help with if needed, especially if it's been several years since you had them cleaned. We have the tools and experience needed to get the job done quickly and efficiently, and we'll also be on the lookout for any other potential problems while we're in there.
Another area we're happy to assist with if needed is your condensate drain line. This is a small but important component of your HVAC system, and if it becomes clogged it can cause all sorts of problems. Most notably, it can lead to water damage in your home as the excess condensate backs up and spills out.
Fortunately, this is something that's relatively easy to prevent with some regular maintenance. Simply pour a cup of bleach down the drain line once a month or so, and this will help keep it clear and free-flowing. Of course, if you're not comfortable doing this yourself our experts can take care of it for you as well.
Finally, one of the best things you can do for your furnace (or any other HVAC component) is to have it professionally inspected and serviced on a regular basis. This is something we recommend at least once a year, and ideally before the start of winter when your furnace will be working the hardest.
During a professional inspection, our experts will thoroughly clean and tune your furnace to help ensure that it's running as efficiently as possible. We'll also be on the lookout for any potential problems that could cause issues down the road, and can often fix them before they become major repairs.
Contact us today at Dick Kearsley Service Center to schedule your fall furnace inspection, and we'll make sure that your home is ready for the cold weather ahead!
520 S State, Clearfield, UT 84015
Hours Of Operation:
Mon-Fri: 8:00 am - 5:00 pm
Saturday: 8:00 am - 4:00 pm
Sunday: Closed
Davis/Morgan: 801-773-4836
Weber County: 801-393-1265
Brigham City: 435-553-4556
Salt Lake: 801-292-1636
© Dick Kearsley Service Center 2023
